AIN-A-D-1
ANALOG INPUT
PLN 599.00incl. VAT
The ANALOG INPUT module brings 0-10 V and 0/4-20 mA signals into a Voldeno installation. Four voltage and four current channels for transmitters and field probes, scaled and filtered in Voldeno Studio.
At a glance
4 + 4
voltage and current inputs
0-10 V
voltage channels
0/4-20 mA
current loops
DIN rail
push-in terminals, fast installation
Voldeno Bus
24 V DC, power and data
HVAC and BMS
transmitters and probes
What it does
Standard transmitters
0-10 V and 4-20 mA signals from pressure, temperature, humidity and air-quality transmitters, scaled per channel in Voldeno Studio.
Analog signals next to digital logic
Sensors that already speak 0-10 V or 4-20 mA reach the same automation logic as the rest of the Voldeno modules, without an extra gateway.
Plant rooms and retrofits
Auxiliary signals from boilers, pumps and air handling units that are still wired as analog loops fit into the same panel without rewiring.
Commissioning and calibration
Engineering units, scaling factors and filtering are set per channel during commissioning and stay with the project.
Full technical specifications
Inputs
- Voltage channels
- 4 × 0-10 V
- Current channels
- 4 × 0/4-20 mA
- Configuration
- Per-channel scaling and filtering in Voldeno Studio
Power supply
- Supply
- 24 V DC via Voldeno Bus
- Terminal type
- Push-in
Communication
- Bus
- Voldeno Bus (BUS+, BUS−, GND)
Mechanical
- Mounting
- Distribution panel on 35 mm DIN rail
- Size (DIN):
- 2
- Dimensions (H / W / D)
- 91 / 36 / 62 mm
- Weight
- 77 g
Environmental
- Operating temperature range:
- 0 - 45 °C
Certifications
- Marking
- CE, RoHS
- Installation
- By a qualified electrician in accordance with local regulations
Connections and wiring
Analog inputs share the panel with power circuits. Follow the ANALOG INPUT wiring guide for shielding, grounding and segregation of signal cables.
- Current loops: respect the transmitter power supply and common reference rules; use the right wiring for two-, three- and four-wire transmitters.
- Voltage inputs: route signal cables away from power conductors and terminate shields per the wiring guide.
- Do not exceed the rated input voltage; use an external signal conditioner for non-standard ranges.
- Voldeno Bus: use BUS+, BUS−, and GND from the Hub or bus segment; keep bus topology within project limits.
Ecosystem integration
The ANALOG INPUT module connects to the Voldeno Bus alongside other extension modules. Scaled values, alarm thresholds and trends are available in Voldeno Studio and Voldeno Mobile, and feed automation logic together with relay outputs and digital inputs.
Requires a Voldeno Hub on the same installation.
In the box
- 1× ANALOG INPUT module (AIN-A-D-1)
- Information leaflet
- Factory packaging
Related products
Voldeno modules often combined in the same electrical enclosure.
Voldeno ANALOG INPUT is the module for bringing 0-10 V and 0/4-20 mA signals into a Voldeno installation. Four voltage and four current channels accept the standard transmitter and probe signals used in HVAC, plant rooms and BMS retrofits.
The ANALOG INPUT module is the right choice wherever the installation still uses classic analog signals. Each channel is scaled and filtered in Voldeno Studio, with engineering units, alarm thresholds and trends available in Voldeno Mobile alongside readings from the rest of the Voldeno modules.
Your next step starts here.
Order the module, consult us about your project, or review the technical documentation before deployment.